SAVE BIG WHEN SHOPPING
FOR USED PARTS!

Saturn Vue 3.6L Engine for Sale Used Low Miles

GM started using its LY7 engine for Saturn Vue vehicles in 2008. The popular 3.6L displacement was first found in Cadillac automobiles. While the 2009 year was the final for Saturn SUVs, GM did carry on the legacy with other vehicles. Using the tools here, a used Saturn Vue 3.6L engine for sale is affordably priced. Specs of the 3.6L Block Internal GM documents name the 3.6-liter V6 as an LY7 RPO code. This 257 horsepower build is a High Feature edition. This family can now be found in Opel and other brands connected to General Motors. A 217 cubic inch displacement means that a lot of torque is possible. A compression ratio of 10:2:1 is delivered in the Vue variant. Someone who is estimating shipping charges should know the weight of the block. It is approximately 370 pounds with zero fluid inside. The XR trim edition was the only was to use the 3.6-liter engine block. An automatic and manual transmission were offered to buyers of the compact compact sport utility vehicles. Each of these gearboxes were meant for use in the 2.4L and luxury XR edition. Reasons People Swap Vue Engines Because the 6-cylinder was used in only one model of the Vue, there were less problems reported. General Motors installed this block in multiple automobiles. Mistakes were learned from, and in all it is a pretty reliable build. The following problems are not found in AutoProsUSA.com inventory: 1. Misfires 2. Bad throttle body 3. Defective camshaft 4. Repeated check engine light problems Making several trips to a mechanic to diagnose problems gets old. The repair expenses added in with lapsed warranty coverage is just too much for some people. It is very […]

By |April 25th, 2016|Saturn|Comments Off on Saturn Vue 3.6L Engine for Sale Used Low Miles

Chevy Malibu 3.6L Engine from a Junk Yard

The Seventh Generation Malibu from Chevy used a 3.6L engine block. This was the Fifth build installed in hopes of offering some new technology to consumers. After starting off with the LE5 four-cylinder, techs at GM switched to the much larger V6. A person doing price research can find a used Chevy Malibu 3.6L engine from a junk yard at a cheap price here. RPO LY7 Motor The Malibu motor can be identified by cross referencing the RPO codes at General Motors. The LY7 is normally stamped on the block or listed in service manuals. The specs include a 217 cubic inch displacement size. The whopping 252 horsepower offered a big increase over the 169 hp four-cylinder model. Production continued through the 2010, 2011 and 2012 years for the Malibu. A 6-speed automatic transmission was the assembly selected to go with the 3.6L. A total of about 26 miles per gallon is to be expected for most preowned editions. This means that someone had regular oil changes and kept up with maintenance. FWD Replacement Malibu Engines Reliability is only possible in a second hand gasoline motor if it has not been beat up. Changing the spark plugs, ignition coil packs and other things are always needed. AutoProsUSA.com has a complete inventory of E85 ready motors. This front-wheel drive versions are cherry picked right from the top Chevy junk yards. Our client base stretches across to Canada as well. It is not hard at all to get the cheapest price. We do this as a courtesy for consumers. Using our website, a production year and correct automaker brand produces the fastest price data. All in stock multi-port fuel injection 3.6L engines are then displayed. Buy Low […]

By |April 23rd, 2016|Chevrolet|Comments Off on Chevy Malibu 3.6L Engine from a Junk Yard

Used Chevy Camaro 3.6L Engine

The Fifth Generation Camaro used a 3.6L VVT engine starting in the 2010 year. This was the V6 version although a larger LS V8 was available as well. Fans of this sports car were shocked to find the High Feature motor block installed. A swap is relatively simple although prices always vary in the USA. On this portal, a sale priced used Chevy Camaro LLT 3.6L engine is available. History of the LLT GM Motor Cadillac was the first brand of automobile that used the 3.6-liter block. A more than generous 312 horsepower was part of the first-run specs. As a next generation V6, this build was only available with two different trim cars. The LT and LS were the two vehicles promoting the V6 with VVT nationwide. GM utilized the 3.6L again for the 2011 year. While the V6 never really caught on with the Camaro, the SS versions always featured the bigger V8. The direct injection fuel pump did help improve the range of power offered. The block has an 11:3:1 compression ratio. 6-speed manual and 6-speed automatic transmissions are found in most post 2009 Camaro cars. This does improve the torque for low gear shifting. Junk yards and dismantling agencies in North America do have inventory of these models available. 3.6L Known Factory Defects GM issued a customer satisfaction bulletin to owners of the LLT V6 after the 2011 year. This was to notify of potential wear to the timing chain. As a complementary service, dealerships did offer a reprogramming of the ECM and changing of the belt. Not all people responded to these requests for after warranty service. The motors that are on sale at AutoProsUSA.com do not have problems with […]

By |April 23rd, 2016|Chevrolet|Comments Off on Used Chevy Camaro 3.6L Engine